Your commute, your lunch break, your flight — with the online APP version of the H3C Constructing H3C High-Performance Campus Networks materials, all of them become study time. Open the GB0-371-ENU exam content once in an online environment, and after that you can keep practicing even offline, on any electronic device you carry.
H3C GB0-371-ENU Exam Overview:
| Certification Vendor: | H3C |
|---|---|
| Exam Name: | H3C Constructing H3C High-Performance Campus Networks |
| Exam Number: | GB0-371-ENU |
| Available Languages: | English |
| Related Certifications: | H3C Certified Network Engineer (HCNE) H3C Certified Network Professional (H3CNE-related tracks) |
| Recommended Training: | H3C Training Courses (Official) |
| Exam Registration: | H3C Official Certification Portal |
| Sample Questions: |  |
| Exam Way: | Typically delivered via authorized test centers or online proctored platforms (varies by region). |
| Pre Condition: | Basic understanding of TCP/IP networking concepts is recommended. |
| Official Syllabus URL: | https://www.h3c.com |
H3C GB0-371-ENU Exam Syllabus Topics:
| Section | Objectives |
|---|---|
| Topic 1: Routing and IP Connectivity | - Inter-VLAN routing - Static and dynamic routing basics |
| Topic 2: Campus Network Fundamentals | - Enterprise network architecture overview - LAN technologies and Ethernet basics |
| Topic 3: Network Security in Campus Networks | - Access control and authentication - Basic network security mechanisms |
| Topic 4: Switching and VLAN Technologies | - STP and loop prevention mechanisms - VLAN configuration and deployment |
| Topic 5: Campus Network Design and Planning | - IP addressing and subnetting design - Hierarchical network design model |
| Topic 6: Network Management and Troubleshooting | - Common network fault analysis - Monitoring and diagnostics tools |
GB0-371-ENU Exam Facts for Busy Professionals
The official training resources include:
Many candidates pair official training with a concise question bank — the courses explain concepts, and distilled practice questions make review time efficient.
The GB0-371-ENU exam is the official examination for the H3C Constructing H3C High-Performance Campus Networks certification from H3C. In an industry that keeps attracting new talent, the credential is a straightforward way to prove how capable and efficient you are — it shows employers that your skills have been measured against a recognized standard, not just claimed.
Official registration channels for the GB0-371-ENU exam:
Booking early secures your preferred slot and gives your preparation a fixed target date.
The official outline organizes the GB0-371-ENU exam into weighted domains, including:
- Campus Network Design and Planning ()
- Network Management and Troubleshooting ()
- Campus Network Fundamentals ()
The H3C Constructing H3C High-Performance Campus Networks question bank at Pass4suresVCE is concise and refined around these same objectives — key points and current question types, with nothing redundant diluting your review.
Basic understanding of TCP/IP networking concepts is recommended.
To save time is to lengthen life — and our delivery lives by that. Upon successful payment, our system automatically sends the GB0-371-ENU exam product to your email address, typically within about a minute, and the confirmation page offers instant download as well. If the email is missing, check your spam folder; after 2 hours without it, contact support. Your purchase also includes 365 days of free updates, with new versions emailed automatically whenever they are released.
Yes, and that is its special advantage. The online APP version of the H3C Constructing H3C High-Performance Campus Networks materials works on any electronic device — mobile phone, computer, tablet. Open it once in an online environment for the first time, and afterwards you can keep practicing the GB0-371-ENU exam questions even without a connection. Anywhere, anytime: the commute, the airport, the quiet corner with no signal. Your preparation schedule finally belongs to you.
H3C Constructing H3C High-Performance Campus Networks Sample Questions:
In the network connection as shown in the figure, SWA and SWB are Layer 3 switches, running STP+VRRP, and after the initial configuration is completed, SWA is the root of STP and Master SWC of VRRP is the Layer 2 switch, which is connected to the following terminals. The description about the network link failure is correct
- A. When only the link between SWB and SWC is intact in the figure, the VRRP Master will remain unchanged, but the SWC downstream terminal cannot communicate with the gateway
- B. When the link between SWB and SWC is interrupted, the port status on the remaining STP links remains unchanged, and Forwarding is still maintained
- C. When only the link between SWB and SWC is intact in the figure, both SVVA and SWB will become VRRP masters, and the lower end of SWC can communicate with the gateway normally.
- D. When the link between SWB and SWC is interrupted, VRRP Master will remain unchanged, and SWC downstream terminals can still communicate normally
Correct Answer: B,D 🗳️
In the switching network as shown in the figure, VLAN10 is set as Isolate-user-vlan on switch SWA, VLAN2 and VLAN3 are set as Secondary VLAN of VLAN 10; VLAN2-VLAN20 is created on switch SWB, and VLAN20 is set as Isolate-user-vlan , VLAN4 is the Secondary VLAN of VLAN20. After setting the IP address of each device as shown in the figure, the local proxy ARP function is enabled on both SWA and SWB. Initially, the switch and pc did not learn their corresponding ARP entries. In the process of PCA ping PCB, PCA will send an ARP request. After receiving the ARP request message, the PCA will send the destination MAC response. The destination MAC address is
- A. 00E0.FC00.0010
- B. FFFF.FFFF.FFFF
- C. 00E0.FC00.0020
- D. 0011.1111.1111
Correct Answer: C 🗳️
The customer's two switches SWA and SWB are connected together through seven Ethernet cables and configured with dynamic link aggregation. The corresponding ports on the switch SWA are Ethernet 1/0/1, Ethernet 1/0/2, and Ethernet 1/0. /3, Ethernet 1/0/4, Ethernet 1/0/5, Ethernet 1/0/6, Ethernet 1/0/7o If the switches SWA and SWB only support 6 ports per aggregation group, and the SWA switch has the following Configuration:
[SWA]interface Ethernet 1/0/7
[SWA-Ethernet1/0/7]lacp port-priority 4096
Check LACP status on the device: output letter: as follows:
[SWA]display lacp system-id
Actor System ID: 0x8000, 00e1-fc00-5000
[SWB]display lacp system-id
Actor System ID: 0x8000, 00e0-fc43-7384
If you change SWA's LACP system priority to 4096, you can know from the above information
- A. In the case of the same port configuration, Ethernet1/0/6 port is the Unselected port of the aggregation group
- B. In the case of the same port configuration, Ethernet1/0/1 port is the aggregation group Unselected
- C. When the configuration of each port is the same, the Ethernet1/0/7 port is the Unselected port of the aggregation group
- D. When the configuration of each port is the same, SWA randomly selects one port among the six ports Ethem shot 1/0/1 to Ethernet 1/0/6 as the aggregation group UnselectM
Correct Answer: A 🗳️
In the network connection as shown in the figure, SWA and SWB enable STP and Loopback-detection at the same time. Please confirm that the port status description of SWA and SWB is correct.
- A. G1/0/1 of SWA may be blocked by STP detecting the existence of a loop
- B. STP detects the existence of a loop between G1/0/2 or G1/0/3 of SWB and blocks one of them
- C. Between G1/0/2 and G1/0/3 of SWB, loopback-detection detects the existence of a loop and blocks one of them
Correct Answer: B 🗳️
In the switching network as shown in the figure, VLAN10 is set to Isolate-userW, VLAN2 and VLAN3 are the Secondary VLAN of VLAN 10 on the switch SWA; VLAN2 VLAN20 is created on the switch SWB, and VLAN20 is set to Isolate-user-vlan, and VLAN4 is After setting the IP address of each device as shown in the figure for the Secondary VLAN of VLAN20, check the MAC address table on the SWB to determine that SWA belongs to
- A. VLAN20
- B. VLAN 10
- C. VLAN 1
- D. VLAN4
- E. VLAN3
- F. VLAN2
Correct Answer: A 🗳️
856 Customer Reviews
