301a Dumps 2024 - New F5 301a Exam Questions
Free 301a Braindumps Download Updated on Feb 28, 2024 with 150 Questions
F5 301a exam is a rigorous exam that requires candidates to have a deep understanding of F5 LTM products and technologies. Candidates must have hands-on experience with F5 BIG-IP LTM solutions and be familiar with networking concepts and protocols. 301a exam is a two-hour, multiple-choice exam, and candidates must score at least 69% to pass. Successful candidates will receive the F5 Certified BIG-IP LTM Specialist: Architect Set-Up & Deploy certification, which demonstrates their expertise in deploying and configuring F5 LTM solutions.
F5 301a exam is a comprehensive exam that covers a wide range of topics related to F5 LTM architecture, deployment, and management. It includes questions on topics such as network design, network protocols, load balancing, and SSL offloading. It also covers advanced topics such as high availability, security, and performance tuning.
NEW QUESTION # 53
An LTM device receives a response string containing "error"
Which monitor type and parameter will mark the HTTP server as down?
- A. HTTP monitor and Receive String "error'' ... flag is up
- B. HTTP monitor, Receive String "error", and set the Reverse option to Yes
- C. HTTP monitor. Receive String "down", and set the Reverse option to Yes .... flag is
- D. HTTP monitor and Receive Disable String "error'' .... flag is disable
Answer: B
NEW QUESTION # 54
A BIG IP system load balances connections to a web application. A TCP-based Denial of Service attack against the web application is occurring, which has caused very high memory utilization on the LTM device due to stale TCP connections.
Which TCP profile option should be used to reduce memory utilization?
- A. Reset on timeout
- B. Idle timeout
- C. Multipath TCP
- D. Slow Start
Answer: B
NEW QUESTION # 55
An LTM Specialist needs to use a set of addresses to access an Internet website in an outbound configuration.
Which feature should the LTM Specialist configure?
- A. SNAT address
- B. NAT address
- C. NAT pool
- D. SNAT pool
Answer: D
NEW QUESTION # 56
A design requires the LTM device to become HA standby when the one of the two physical interface on the External trunk is down the External trunk is an interface on the External VLAN Which TMOS command enables this behavior?
- A. tmsh modify net van External failsafe enabled
- B. tmsh create sys ha-group External trunks add Externally
- C. tmsh create sys ha-group External trunks add External threshold 2 weight 101)
- D. tmsh create sys ha-group External trunks add ( External( attribute percent up-members 100))
Answer: C
NEW QUESTION # 57
An LTM Specialist is experiencing issues in a failover event. Certain long-lasting FTP event. Certain long-lasting FTP connections using a single node pool are forced to reconnect. The bigip.conf extract is shown:
What does the LTM Specialist need to change in the configuration to avoid this issue?
- A. persistence mirroring
- B. snatpool
- C. connection mirroring
- D. ftp profile
Answer: C
Explanation:
The stem mentions that it is a single server node, so there is no need to consider the factors of session maintenance. The actual requirement is to maintain the original connection status during failover. You need to configure connection mirroring to synchronize the connection status between the devices in the cluster in real time.
NEW QUESTION # 58
An LTM Specialist needs to provide access to a 8BG-IP to device for a company's support person access to the BIG IP device, but are NOT allowed to change any settings All support the support remote access to the BIG-IP device, but are NOT allowed to change ant settings. All support have accounts in the company's Active Directory Which method is appropriate to provide access for the support personnel to the BIG-JP device?
- A. configure remote authentication and map support personnel users to the Guest user role
- B. configure remote authentication for all users with a default user role of Guest
- C. configure remote authentication for all users with a default user role of Operator
- D. configure remote authentication and map support personnel users to the Operator user role
Answer: A
NEW QUESTION # 59
Refer to the exhibit.
The http monitor is applied to a pool. All members are enabled. One server responds as follows.
What is the resulting status of this poo! member?
- A. Available (Enabled)
- B. Unavailable (Disabled)
- C. Offline (Enabled)
- D. Offline (Disabled)
Answer: C
Explanation:
The first picture "Send String" and "Receive String" are not clear. Send String should be "GOOD", the response packet does not contain this keyword. Receive Disable String is completely unclear. If the response packet contains the content of Receive Disable String at this time, it will be Available (Disabled), If the content of Receive Disable String is not included, then Offline (Enabled).
NEW QUESTION # 60
A new web application is being deployed Mutual SSL authentication must be used to authenticate clients.
Which of the following two tasks must be completed to meet the requirements? (Choose two)
- A. configure the client SSL profile with "Client Certificate" set to require
- B. configure the client SSL profile with the Trusted .Certificate Authorities
- C. configure the server SSL profile with "Client Certificate" Set to require
- D. instruct the desktop team to update the web browser to the most recent release
- E. generate a CSR to register a certificate with the CA
Answer: A,B
NEW QUESTION # 61
AN LTM Specialist needs to determine the delay between an LTM device and the internal web server for a specific client.
Which two AVR reporting options should the LTM Specialist enable to measure the delay? (Choose two.)
- A. Server latency
- B. Client IP
The problem is to specify the server delay of the client - C. User agents
- D. Methods
- E. Response codes
Answer: A,B
NEW QUESTION # 62
An LTM Specialist regularly provides analytics reports that show that traffic generated by different subnets within the organization. The LTM Specialist needs show the associate department names next the IP addresses in the reports.
Which step should the LTM Specialist take to meet this requirement?
- A. use an iRule to change the output of the report
- B. create VLANs for each subnet and set the name accordingly
- C. export the report and add the department names manually
- D. define active subnets and assign a name to certain subnets
Answer: B
NEW QUESTION # 63
An LTM Specialist needs to apply SNAT using currently used SNAT pool to a new virtual server.
What needs to be completed before applying that configuration change?
- A. Make sure that the BIG-IP device is NOT operating under heavy load during peak times
- B. Review connection for the selected SNAT pool and enlarge it if appropriate
- C. Verify that the IP address of the SNAT pool are in the same subnet as the pool members
- D. Verify that the IP address of the SNAT pool are in the same VLAN as the pool members.
SNAT does not need to in the same vlan or same network segment as the pool member, as long as the route is reachable , excluding C and D he connection information of the SNAT pool to avoid port exhaustion under high concurrency
Answer: B
NEW QUESTION # 64
Refer to the Exhibit.
An LTM Specialist notices that two members in a pool are overloaded. To relive the existing members a fourth member (10.128.20.14) is brought up.
How many member will receive and process new connections?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 65
An LTM device provides load balancing to a web application? The LTM device has two dual-core processors and a licensed SSL Transactions Per Second (TPS) limit of 500 CMP is enabled.
TLS connections are used between client systems and virtual servers on the LTM device, as well as from the LTM device to servers used as part of LTM pool.
TLS enabled virtual servers utilize certificates based on 2048-bit keys During a peak period. 2560 new TLS transactions per second are attempted to the web application via the LTM device.
What will happen in this scenario?
- A. 2060 new TLS transactions will be silently discarded due to the SSL TPS license limit
- B. Nothing: TLS transactions per second are NOT affected by an SSL TPS license limit
- C. Nothing: 2560 TLS transactions per second is within the SSI TPS license limit.
- D. 560 new TLS transactions will be silently discarded due to the SSL TPS license limit
Answer: D
NEW QUESTION # 66
Which Standard Virtual Server settings should an LTM Specialist use to load balance across routed path of two different ISPs?
- A. address translation disabled and port translation enabled
- B. address translation enabled and port translation disabled
- C. both address and port translation enabled
- D. both address and port translation disabled
Answer: C
NEW QUESTION # 67
An LTM Specialist needs to gather website statistics such as latency and throughput on the existing virtual server. This virtual server load Balances the backend web servers.
Which F5 feature will provide this?
- A. the Dashboard
- B. the AVR module
- C. the Statistics panel
- D. the Performance panel
Answer: B
NEW QUESTION # 68
An LTM Specialist reports that an application si no longer reachable after it has been upgraded.
Nothing has been changed in the configuration on the LTM device.
The logs indicates that health monitors to all servers have failed as shown:
What should the LTM Specialist verify next?
- A. That the can still ping the servers from te BIG_ IP device.
- B. That the firewall between the BIG-ip device and servers is still allowing HTTP
- C. That the TCP hand shake with the servers is stall completed using tcpdump
- D. That the custom receive string for the HTTP monitor has changed with the upgrade
Answer: D
Explanation:
The log shows that tcp detection is normal, but http detection is abnormal. So we should pay attention to the detection problem of http level
NEW QUESTION # 69
Remote users who access the LTM device are authenticated via Radius. The default remote user role is Guest Some users need LTM device with the Administrator role. The F5 Radius attributes are configure on the Radius server.
Which configuration item needs to be created?
- A. User role
- B. Remote User role
- C. Admin account
- D. User account
Answer: B
NEW QUESTION # 70
Exhibit.
An LTM Specialist needs to configure VS^HTTP and VS_DB for an online shopping site. The VS HTTP passes the client requests to the webservers. The webservers query the database servers through the VS_DB. Initially, the LTM Specialist finds the database servers directly return the packets to the webservers.
which setting must be enabled for the configuration to function correctly?
- A. VS DB auto last hop
- B. VS_DB snat auto map
- C. VS_HTTP snat auto map
- D. VS.HTTP auto last hop
Answer: A
NEW QUESTION # 71
An LTM Specialist configures a new virtual server with a single pool member. The LTM Specialist has NOT defined a health monitor for the pool, pool member or node.
What is the status of the virtual server?
- A. Unavailable (Enabled)
- B. Available (Enabled)
- C. Unknown (Enabled)
- D. Offline (Disabled)
Answer: C
NEW QUESTION # 72
......
F5 301a Exam Practice Test Questions: https://www.pass4suresvce.com/301a-pass4sure-vce-dumps.html
Updated Certification Exam 301a Dumps - Practice Test Questions: https://drive.google.com/open?id=11GBhQhwtdhjRlrVdeDyBCAi52CDNZwVC