[Aug-2022] Pass C-IBP-2208 Exam in First Attempt UpdatedC-IBP-2208 Pass4suresVCE Exam Question
SAP Certified Application Associate Dumps C-IBP-2208 Exam for Full Questions - Exam Study Guide
SAP C-IBP-2208 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
NEW QUESTION 30
Which of the following are inputs to Demand Sensing with Gradient Boosting (Full) algorithm?Note: There are 2 correct answers to this question.
- A. Future Consensus Forecasts and Lagged Forecast Snapshots
- B. Forecast Error CV Calculated by Manage Forecast Error Calculations app
- C. Recommended Safety Stocks from Multistage Inventory Optimization
- D. Sales Order Quantities (both historical and future open orders)
Answer: A,C
NEW QUESTION 31
Which of the following conditions are relevant for subtotals in the planning view?Note: There are 2 correct answers to this question.
- A. The total number of attributes that can use subtotals in the planning view can be restricted.
- B. The total value can be added before or after the selected attribute.
- C. Only attribute-based totals can be added to the planning view.
- D. The values of the attribute-based total at the highest attribute level in the planning level can be changed.
Answer: A,B
NEW QUESTION 32
You are reviewing the master data types that are often used for supply and inventory planning
.Which master data types are compound master data types?Note: There are 2 correct answers to this question.
- A. SOURCEPRODUCTION
- B. SOURCECUSTOMER
- C. SOURCECUSTGROUP
- D. SOURCELOCATION
Answer: B,D
NEW QUESTION 33
You want to maintain key figure values for a new attribute and value combination, using SAP IBP, Add-in for Microsoft Excel, and are receiving an error related to missing combinations.How can you resolve this problem?Note: There are 2 correct answers to this question.
- A. Use the option New Planning Object in the SAP IBP, add-in for Microsoft Excel
- B. Use the Check Mode operator to create the combinations
- C. Use the Data Integration app to load suitable data that creates the combinations
- D. Use the Manage Master Data app to create the combinations
Answer: C,D
NEW QUESTION 34
What function would you use to configure a year-to-date calculation?
- A. Cumulative Aggregation
- B. Last Period Aggregation
- C. Dynamic Rolling Aggregation
- D. Rolling Aggregation
Answer: A
NEW QUESTION 35
Time profiles are made out of levels, and levels are made out of periods.Which ways can SAP IBP identify profiles and periods?Note: There are 2 correct answers to this question.
- A. Both periods and profiles are identified by a unique integer.
- B. Both periods and profiles have start and end dates.
- C. Periods are identified by an integer and profiles by an alphanumeric prefix.
- D. Periods are identified by an alphanumeric prefix and profiles by an integer.
Answer: C,D
NEW QUESTION 36
Which of the following data can be tracked using a change-history-enabled key figure?Note: There are 3 correct answers to this question.
- A. Modified date
- B. Reason code
- C. Scenario ID
- D. Key figure type
- E. Attributes
Answer: A,B,E
NEW QUESTION 37
You are working to realign the data due to a recent warehouse closure.What should you be aware of in regards to the realignment steps settings?Note: There are 2 correct answers to this question.
- A. A realignment step can change master data, planning objects and key figures.
- B. The name of the realignment step should be no longer than 20 characters.
- C. The number of steps in the realignment run is limited to 255.
- D. You must mark the realignment step as "shared" and assign the steps to users.
Answer: A,D
NEW QUESTION 38
Safety Stock outputs from Multistage Inventory Optimization are sent to which of these processes? Note: There are 2 correct answers to this question.
- A. Decoupling Points determination in SAP IBP for demand-driven replenishment
- B. Supply Heuristics in SAP IBP for sales and operations
- C. Charts creation in SAP Supply Chain Control Tower
- D. Demand Sensing with Gradient Boosting (Full)
Answer: B,D
NEW QUESTION 39
You are starting a new implementation project for SAP IBP and are considering the possible system architecture.What are the possible approaches for setting up the system landscape?Note: There are 2 correct answers to this question.
- A. Create additional planning areas in the test system to support training needs.
- B. Set up a three-tier landscape using transport, starting from the development system to test and production.
- C. Set up a two-tier landscape, and have the configuration of the development system regularly updated from the production system.
- D. Create additional test planning areas in the production system to support cutover needs.
Answer: B,C
NEW QUESTION 40
You need to define a new logic for a key figure to drive values from the PERPRODCUSTREGION level to the PERPRODCUST level.Which of the following configuration options are possible for this process?Note: There are 2 correct answers to this question.
- A. Splitting the values from aggregated to detailed level, based on the time profile attribute
- B. Splitting the values from aggregated to detailed level, based on a stored split-factor key figure
- C. Splitting the values from detailed to aggregated level by using a copy operator
- D. Splitting the values from aggregated to detailed level using multiplication by the proportions
Answer: B,D
NEW QUESTION 41
Which of these conditions must be met to create a Local Member key figure?Note: There are 2 correct answers to this question.
- A. Activate Local Member Recognition setting is selected.
- B. Use Excel Cell References in the Report Editor option is selected.
- C. A key figure is selected in the Key Figures tab in the SAP IBP, add-in for Microsoft Excel.
- D. Users should have authorization for template administration.
Answer: A,D
NEW QUESTION 42
What are some of the prerequisites for configuring a planning area that results in a successful consistency check?Note: There are 2 correct answers to this question.
- A. Configure at most two input key figures on the same planning level in a key figure calculation.
- B. Assign the compound master data type and its component master data types.
- C. Configure at least one calculated key figure for the planning area.
- D. Specify a planning horizon in the planning area for each level of the assigned time profile.
Answer: B,D
NEW QUESTION 43
What does ABC/XYZ segmentation allow you to do?Note: There are 2 correct answers to this question.
- A. Use forecasting algorithms that are specific to seasonal demands of SKUs in the segment "B".
- B. Identify inventory items that require closer attention.
- C. Substitute missing values in case of sporadic demands.
- D. Choose time-independent key figures as segmentation measures.
Answer: B,D
NEW QUESTION 44
You need to make manual adjustments to your S&OP plan.Which are possible ways of making these changes?Note: There are 2 correct answers to this question.
- A. Leveraging the web-based planning capability
- B. Using Microsoft Excel planning views
- C. Leveraging the functionality of SAP Workzone
- D. Using Driver-Based planning
Answer: A,B
NEW QUESTION 45
How many different time levels can be selected within one planning view?
- A. Only time levels from the base planning level of selected key figures
- B. All time levels available in the time profile
- C. All time levels available in the time profile, restricted by global configuration parameter
- D. Only base time levels of the planning area
Answer: B
NEW QUESTION 46
You set up time-series integration using Cloud Integration for Data Services. During the integration process of master data, an error occurred. In the Data Integration app the job failed with status "Fatal Error". How can you find more details about the error?
- A. Navigate to the Master Data Workbook in Excel and open the Log.
- B. Download the Rejection Report in the Data Integration app.
- C. Download the Initial Problem Report in the Data Integration app.
- D. Navigate to the Manage Master Data app and open the Log.
Answer: D
NEW QUESTION 47
You are working with inventory key figures.What are some of the business scenarios where you can use the Last Period Aggregation function?Note: There are 2 correct answers to this question.
- A. Calculating how many periods inventory is going to last based on the planned demand
- B. Calculating the value of inventory on a weekly basis, using static aggregation from the daily level
- C. Calculating the value of inventory on any time profile level ensuring flexibility of calculation
- D. Search for and return the last not null value of the inventory key figure
Answer: A,D
NEW QUESTION 48
Which of the following data inputs, when increased, will always cause an increase in the safety stock outputs when the Global (multi-stage) Inventory Optimization operator is run?Note: There are 2 correct answers to this question.
- A. Minimum Lot Size
- B. Holding Cost Percentage
- C. Target Service Level
- D. Transportation Lead Time Error CV
Answer: A,C
NEW QUESTION 49
You are implementing SAP IBP to plan for a supply chain that experiences high seasonality.What supply planning operators can be used in your model to plan stock pre-builds?
- A. Supply optimizer and supply heuristics
- B. Finite and infinite heuristics
- C. Supply optimizer only
- D. Finite heuristics only
Answer: A
NEW QUESTION 50
Which of the following are features of the S&OP process templates?Note: There are 2 correct answers to this question.
- A. The S&OP process step can be started with an application job.
- B. Each step depicted in the template can have tasks associated with it.
- C. All process templates are assigned to dashboards.
- D. New instances of templates allow for re-use of the same processes.
Answer: B,D
NEW QUESTION 51
......
Authentic Best resources for C-IBP-2208 Online Practice Exam: https://www.pass4suresvce.com/C-IBP-2208-pass4sure-vce-dumps.html
Get the superior quality C-IBP-2208 Dumps with explanations waiting just for you, get it now: https://drive.google.com/open?id=1S465pku5SxNYSIrzbhiE0v8yFQ95R2RW