Free 365 Days Exam Updates C-SACS-2308 dumps with test Engine Practice
Updated Verified C-SACS-2308 dumps Q&As - 100% Pass Guaranteed
NEW QUESTION # 34
When you are adding a calculation to a table (see graphic below) and choose Single, to which of the following is the new column added?
- A. Every dimension member
- B. Story repository
- C. @Data model
- D. Selected dimension member
Answer: D
Explanation:
When you are adding a calculation to a table, you can choose from two options: Single or Multiple. The option determines how many new columns are added to the table based on the calculation. The options are:
Single: Adds one new column to the table with the calculation result for the selected dimension member. For example, if you select Soft Drinks and choose Single, you will get one new column with the calculation result for Soft Drinks only.
Multiple: Adds multiple new columns to the table with the calculation result for each dimension member. For example, if you select Soft Drinks and choose Multiple, you will get three new columns with the calculation result for Soft Drinks, Juice, and Alcohol.
Therefore, the correct answer is Selected dimension member, as it is the option that the new column is added to when you choose Single. Verified Reference:: Create Calculations in Tables
NEW QUESTION # 35
When you create a new story and select a responsive page, which choice are you offered?
- A. Model or Dataset
- B. Chart or Table
- C. Optimized or Classic Design Experience
- D. Mobile device or Desktop
Answer: C
Explanation:
When you create a new story and select a responsive page, you are offered the choice of Optimized or Classic Design Experience. This choice determines the design mode that you will use to create your story. The Optimized Design Experience is the newer and more advanced design option that offers several usability improvements and performance enhancements compared to the Classic Design Experience. However, the Optimized Design Experience also has some limitations and differences, such as the unavailability of some elements that are present in the Classic Design Experience1. Therefore, you should choose the design mode that best suits your needs and preferences. You can also switch between the design modes later, but you may lose some features or formatting in the process2.
Reference:
1: Choosing Between Optimized and Classic Design Modes - SAP Learning 2: Switching Between Optimized and Classic Design Modes - SAP Learning
NEW QUESTION # 36
Which filter options are supported in the Optimized Design Experience? Note: There are 3 correct answers to this question.
- A. Widget
- B. Section
- C. Story
- D. Input Control
- E. Controls
Answer: A,C,D
NEW QUESTION # 37
Using the SAP Analytics Cloud mobile app, what page type is required for viewing stories?
- A. Grid
- B. Canvas
- C. Responsive
Answer: C
Explanation:
Using the SAP Analytics Cloud mobile app, the page type that is required for viewing stories is responsive. Responsive pages are designed to adapt to different screen sizes and orientations, making them suitable for mobile devices. Canvas and grid pages are not supported by the mobile app; they are designed for desktop browsers and fixed layouts. Verified Reference: [SAP Analytics Cloud - Mobile App]
NEW QUESTION # 38
When converting a story to Optimized Design Experience, what happens if the story contains elements that are not yet supported?
- A. The unsupported elements become placeholders.
- B. The unsupported elements are deleted.
- C. You receive a warning with information about what you must change.
- D. You receive a warning that the story will be deleted.
Answer: C
NEW QUESTION # 39
For which of the following tasks can you use an input control? Note: There are 2 correct answers to this question.
- A. Explore data relationships
- B. Define a prompt
- C. Filter dimension or measure
- D. Select dimension or measure
Answer: C,D
Explanation:
An input control is a type of filter that allows you to dynamically change the values of dimensions or measures in your story or application. You can use an input control to filter dimension or measure values and select dimension or measure values for your widgets, such as charts, tables, or geo maps1. For example, you can create an input control that lets you choose which product category or year to display in your chart2.
You cannot use an input control to define a prompt or explore data relationships. A prompt is a filter that is applied to a model before the data is loaded into a story or an application. Prompts allow you to select the data that you want to see in your story or application. You can create prompts in the modeler, not in the story or application3. To explore data relationships, you can use the Smart Discovery feature, which allows you to automatically generate insights and visualizations based on your dat a. You can access Smart Discovery from the context menu of a chart or table widget4.
NEW QUESTION # 40
What is a property of a public dataset?
- A. It can be shared among different stories.
- B. Its data is structured in a star schema.
- C. Its data source can be changed.
- D. It can be converted to a model.
Answer: A
Explanation:
A public dataset is a type of dataset that is shared among different stories. You can use public datasets to create stories or blend data with models. A public dataset has the following properties:
It can be shared among different stories. You can use public datasets in multiple stories without having to import them again.
It cannot be converted to a model. You cannot convert a public dataset to a model. If you want to create a model from a public dataset, you have to import it as a private dataset first.
Its data is not structured in a star schem
a. A public dataset does not have any predefined dimensions or measures. It only has columns and rows of data.
Its data source cannot be changed. You cannot change the data source of a public dataset after you import it. If you want to update the data in a public dataset, you have to import a new file.
NEW QUESTION # 41
How does the SAP Digital Boardroom support engaging with a remote audience? Note: There are 2 correct answers to this question.
- A. Through screen sharing
- B. Through Data Analyzer
- C. Through annotations
- D. Through story editing
Answer: A,C
Explanation:
The SAP Digital Boardroom supports engaging with a remote audience through annotations and screen sharing. Annotations allow users to highlight or draw on the screen using different colors and shapes, which can help to emphasize key points or explain complex concepts. Screen sharing allows users to share their screen with other participants who join the digital boardroom session via a web browser, which can help to facilitate collaboration and communication. Data Analyzer and story editing are not features that support engaging with a remote audience; they are features that allow users to analyze data or modify stories in the digital boardroom. Verified Reference: [SAP Analytics Cloud - Digital Boardroom]
NEW QUESTION # 42
In which of the following are datapoint comments stored?
- A. In the widget
- B. In the data model
- C. In the page
- D. In the story
Answer: B
Explanation:
Datapoint comments are stored in the data model, not in the widget, page, or story. This means that datapoint comments are visible across different stories that use the same model, and they are preserved when a story is duplicated or exported. Verified Reference: [SAP Analytics Cloud - Datapoint Comments]
NEW QUESTION # 43
Which Filter options are supported in the Optimized Design Experience? Note: There are 3 correct answers to this question.
- A. Section
- B. Advanced
- C. Input Control
- D. Cascading
- E. Controls
Answer: B,C,D
NEW QUESTION # 44
What is a property of a public dataset?
- A. It can be shared among different stories.
- B. Its data is structured in a star schema.
- C. Its data source can be changed.
- D. It can be converted to a model.
Answer: A
Explanation:
A public dataset is a type of dataset that is shared among different stories. You can use public datasets to create stories or blend data with models. A public dataset has the following properties:
It can be shared among different stories. You can use public datasets in multiple stories without having to import them again.
It cannot be converted to a model. You cannot convert a public dataset to a model. If you want to create a model from a public dataset, you have to import it as a private dataset first.
Its data is not structured in a star schem
a. A public dataset does not have any predefined dimensions or measures. It only has columns and rows of data.
Its data source cannot be changed. You cannot change the data source of a public dataset after you import it. If you want to update the data in a public dataset, you have to import a new file.
NEW QUESTION # 45
What are the presentation types for the Digital Boardroom? Note: There are 2 correct answers to this question.
- A. Dashboard
- B. Agenda
- C. Canvas
- D. Custom
Answer: A,B
NEW QUESTION # 46
How does the SAP Digital Boardroom support engaging with a remote audience? Note: There are 2 correct answers to this question.
- A. Through screen sharing
- B. Through Data Analyzer
- C. Through annotations
- D. Through story editing
Answer: A,C
NEW QUESTION # 47
Which of the following can you use to change the formatting of a table in the Styling panel? Note: There are 2 correct answers to this question.
- A. Thresholds
- B. Styling rules
- C. In-Cell Charts
- D. Table template
Answer: B
NEW QUESTION # 48
Which sort options are available in stories?Note: There are 2 correct answers to this question.
- A. Dimensions and measures together
- B. Multiple measures together
- C. Ascending and descending order
- D. Multiple dimensions together
Answer: C,D
NEW QUESTION # 49
What are the presentation types for the Digital Boardroom? Note: There are 2 correct answers to this question.
- A. Dashboard
- B. Agenda
- C. Canvas
- D. Custom
Answer: A,B
Explanation:
The presentation types for the Digital Boardroom are dashboard and agend a. Dashboard allows users to create a custom layout of widgets and pages on a large screen, such as a wall-mounted monitor or a projector. Agenda allows users to create a structured sequence of pages and topics that can be navigated using a touch screen, such as a tablet or a laptop. Custom and canvas are not presentation types for the Digital Boardroom; they are options that can be used to design dashboard layouts or story pages. Verified Reference: [SAP Analytics Cloud - Digital Boardroom]
NEW QUESTION # 50
In the Optimized Design Experience, which SAP Analytics Cloud tool replaces Explorer?
- A. Data Analyzer
- B. Point of Interest
- C. Value Driver Trees
- D. Modeler
Answer: A
NEW QUESTION # 51
When break grouping is enabled, to which dimension is sort applied?
- A. The outer dimension
- B. The inner dimension
- C. The horizontal dimension
- D. The vertical dimension
Answer: B
NEW QUESTION # 52
Which calculation type can you use to categorize dimension members?
- A. Dimension to measure
- B. Difference from
- C. Measure-based dimension
- D. Calculated dimension
Answer: C
Explanation:
This is a calculation type that you can use to categorize dimension members, according to the SAP Analytics Cloud Help1. A measure-based dimension is a dimension that is created from a measure by applying a range or a binning function1. For example, you can create a measure-based dimension called Age Group from a measure called Age by using the binning function to group the age values into different categories, such as 0-10, 11-20, 21-30, and so on1. This way, you can analyze your data by the age groups instead of the individual age values1.
The other options are not correct. Option A. Difference from is a calculation type that you can use to compare the difference between two measures or two members of a dimension2. For example, you can use this calculation type to show the difference between the sales revenue of this year and last year2. Option B. Dimension to measure is a calculation type that you can use to convert a dimension to a measure by counting the number of distinct values in the dimension3. For example, you can use this calculation type to count the number of unique customers in your data3. Option D. Calculated dimension is a calculation type that you can use to create a new dimension from an existing dimension by applying a formula or an expression4. For example, you can use this calculation type to create a new dimension called Region from an existing dimension called Country by using a formula to assign each country to a region4.
1: Measure-Based Dimensions | SAP Help Portal 2: Difference From | SAP Help Portal 3: Dimension To Measure | SAP Help Portal 4: Calculated Dimensions | SAP Help Portal
NEW QUESTION # 53
What can be done with story filters?
- A. They can be applied to all widgets based on the same model.
- B. They can be implemented without a model in a template.
- C. They can be used to change dimensions in a widget.
Answer: A
Explanation:
Story filters are a feature that allows you to filter the data in a story based on one or more dimensions or measures. You can use story filters to do the following:
They can be applied to all widgets based on the same model. You can choose which widgets are affected by the story filter and which are not.
They can be used to create dynamic titles or text based on the filter values. You can insert filter tokens into titles or text elements to show the current filter values.
They can be used to create input controls that allow users to change the filter values interactively. You can add input controls such as drop-down lists, sliders, checkboxes, etc., to let users select their own filter values.
Story filters cannot do the following:
They cannot be implemented without a model in a template. You need to have a model as a data source for your story before you can apply story filters.
They cannot be used to change dimensions in a widget. You cannot use story filters to swap dimensions in a widget. You have to use the chart builder or the table builder to change dimensions in a widget.
Therefore, the correct answer is They can be applied to all widgets based on the same model, as it is what can be done with story filters. Verified Reference:: Filter Data in Stories
NEW QUESTION # 54
Which add-ons can you configure for a chart? Note: There are 2 correct answers to this question.
- A. In-Cell Charts
- B. Variance
- C. Linked Analysis
- D. Scaling
Answer: A,B
Explanation:
According to the SAP Help Portal1, you can configure different add-ons for a chart to enhance its appearance and functionality. Some of the add-ons that are available are:
Variance: This add-on allows you to compare two measures and show the difference and percentage difference between them. You can also choose to display the variance as a bar, line, or area chart on top of the original chart2.
Scaling: This add-on allows you to adjust the scale of the chart axes to better fit the data range. You can choose to use a linear, logarithmic, or percentage scale for the axes3.
Linked Analysis: This add-on allows you to link multiple charts or tables that share the same data source. When you select a data point in one chart or table, the other linked charts or tables will filter accordingly4.
In-Cell Charts: This add-on allows you to display mini charts within the cells of a table. You can choose from different types of in-cell charts, such as bullet, bar, or sparkline charts5.
Therefore, Variance and In-Cell Charts are add-ons that can be configured for a chart, while Scaling and Linked Analysis are not.
NEW QUESTION # 55
Which of the following can you use to create a chart for each member of a dimension?
- A. Value Driver Tree
- B. Section
- C. In-Cell Charts
- D. Trellis
Answer: B
Explanation:
A section is a way of organizing a story into different parts based on a dimension. A section creates a separate page for each member of the dimension, and displays the same widgets on each page with the data filtered by the section dimension1. For example, if you create a section based on the Country dimension, you will have a page for each country in your data, and the charts and tables on each page will show only the data for that country.
The other options are not correct because:
Value Driver Tree: This is a widget that allows you to create a graphical representation of how different drivers affect a key performance indicator (KPI). You can use this widget to perform simulations and what-if scenarios on your data2. However, this widget does not create a chart for each member of a dimension.
In-Cell Charts: These are mini charts that are displayed within table cells to show the relative values of measures. You can use this feature to enhance the readability and analysis of your data3. However, this feature does not create a chart for each member of a dimension.
Trellis: This is a feature that allows you to split a chart into multiple smaller charts based on one or more dimensions. You can use this feature to compare and contrast different segments of your data4. However, this feature does not create a separate page for each member of a dimension.
Reference:
1: Creating Sections - SAP Learning 2: Using Value Driver Trees - SAP Learning 3: Using In-Cell Charts - SAP Learning 4: Using Trellis Charts - SAP Learning
NEW QUESTION # 56
In a table you display a time hierarchy with the years 2024, 2025, and 2026. Months, quarters, and half years are also displayed for each year. You want to apply the formatting of the year 2024 to the years 2025 and 2026. In styling rules, which level option do you select?
- A. Self and Siblings
- B. Self and Children
- C. Self
- D. Self and Descendants
Answer: D
Explanation:
To apply the formatting of the year 2024 to the years 2025 and 2026, you need to use the level option Self and Descendants in the styling rules. This option applies the formatting to the selected member and all its lower-level members in the hierarchy1. In this case, the selected member is the year 2024, and its lower-level members are the months, quarters, and half years that belong to 2024. The formatting will also be applied to the years 2025 and 2026, and their lower-level members, because they are at the same level as 2024 in the hierarchy.
The other level options are:
Self: This option applies the formatting only to the selected member, not to any other members in the hierarchy1. In this case, the selected member is the year 2024, and the formatting will not be applied to any other years or lower-level members.
Self and Siblings: This option applies the formatting to the selected member and all its siblings, which are members at the same level in the hierarchy1. In this case, the selected member is the year 2024, and its siblings are the years 2025 and 2026. The formatting will be applied to these three years, but not to their lower-level members.
Self and Children: This option applies the formatting to the selected member and its immediate children, which are members one level below in the hierarchy1. In this case, the selected member is the year 2024, and its immediate children are the quarters and half years that belong to 2024. The formatting will be applied to these members, but not to any other years or months.
Reference:
1: Styling Rules for Tables
NEW QUESTION # 57
......
Provide Valid Dumps To Help You Prepare For Certified Application Associate - SAP Analytics Cloud Story Design Exam: https://www.pass4suresvce.com/C-SACS-2308-pass4sure-vce-dumps.html
C-SACS-2308 Dumps Questions [2024] Pass for Exam: https://drive.google.com/open?id=1r025_mAuD8UCpsuD1wH2YAu2pdTNOZGY