Real EMC D-PM-MN-23 Exam Dumps with Correct 90 Questions and Answers
Valid D-PM-MN-23 Test Answers & EMC D-PM-MN-23 Exam PDF
NEW QUESTION # 47
A PowerMax array with eNAS experiences a failure of an I/O module that is configured to a Data Mover (DM).
Which program is used to fail the DM over to the standby DM before replacing the I/O module?
- A. Symmwin
- B. Unisphere for PowerMaxb
- C. Unisphere for VNX
- D. Simplified Symmwin
Answer: C
NEW QUESTION # 48
A system administrator requires site-specific details such as system code level, serial number, model, and spare service type.
Which View Block in Symplified Symmwin provides these details?
- A. System Management
- B. Site Note
- C. Site Info
- D. Tasks
Answer: C
NEW QUESTION # 49
How do PowerMax 2000 and 8000 models differ in terms of local RAID options?
- A. They offer the same RAID options
- B. PowerMax 8000 offers more flexible RAID configurations
- C. PowerMax 8000 supports only RAID 5 and 6
- D. PowerMax 8000 offers more flexible RAID configurations
Answer: B
NEW QUESTION # 50
Which of the following is a hardware component unique to PowerMax 8000 compared to PowerMax
2000?
- A. Dual in-line memory modules (DIMMs)
- B. NVMe SSDs
- C. Enhanced flash modules (EFMs)
- D. More powerful CPUs
Answer: C
NEW QUESTION # 51
What type of RAID configuration does PowerMax 8500 support?
- A. Only proprietary Dell EMC RAID configurations
- B. Flexible RAID configurations, including RAID 5, 6, and Diamond
- C. RAID 6 and RAID 10 only
- D. RAID 1 and RAID 5 only
Answer: B
NEW QUESTION # 52
What can be used to prepare a service laptop to connect to a PowerMax 8000 array that does not have a KVM?
- A. CS SSH Tunnel Manager
- B. IP Switcher
- C. Remotely Anywhere
- D. Simplified Symmwin
Answer: B
NEW QUESTION # 53
Which two PowerMax hardware components require the use of ESD tools during replacement?
- A. I/O Modules
- B. DIMMS
- C. Power Supplies
- D. SPS
Answer: A,D
NEW QUESTION # 54
What is the maximum number of DMEs that can be installed in system bay one of an unbalanced PowerMax 8500 system?
- A. Two
- B. Three
- C. Four
- D. Six
Answer: C
NEW QUESTION # 55
Which two front-end emulations are available for PowerMax 8000 arrays?
(Select 2)
- A. FA
- B. DX
- C. DN
- D. SE
Answer: A,B
NEW QUESTION # 56
What should be ensured before accessing PowerMax 2000 and 8000 arrays for maintenance purposes?
- A. Proper user authentication and authorization
- B. The latest software version is installed
- C. The arrays are disconnected from the power source
- D. The arrays are in a specific maintenance mode
Answer: A
NEW QUESTION # 57
What role does PowerMaxOS 10 play in optimizing storage performance?
- A. Automated performance optimization
- B. Periodic performance reporting
- C. Manual tuning of performance settings
- D. User-driven performance analysis
Answer: A
NEW QUESTION # 58
Refer to the exhibit:
What node FRU component is indicated?
- A. Boot Drive
- B. Back End Module
- C. Data Reduction Offload Module
- D. Fabric Attach Module
Answer: C
NEW QUESTION # 59
What is a key advantage of using Simplified Symmwin for FRU procedures in PowerMax systems?
- A. It automatically updates the system firmware
- B. It eliminates the need for manual intervention
- C. It performs system backups before any procedure
- D. It provides guided, step-by-step instructions
Answer: D
NEW QUESTION # 60
Refer to the exhibit.
What does "DRIVE-A:1" represent?
- A. Physical location of the drive in the bay
- B. Drive type and spare drive location
- C. Drive type and number
- D. Physical location of the drive in the DAE
Answer: D
NEW QUESTION # 61
Which feature of PowerMax 8500 caters to the demand for rapid data access?
- A. High-speed caching
- B. Extended disk capacity
- C. Additional external storage
- D. Manual data retrieval processes
Answer: A
NEW QUESTION # 62
What is an important step to perform after replacing a FRU in a PowerMax system? (Choose two)
- A. Running a full system diagnostic test
- B. Verifying the successful integration of the new FRU
- C. Reconfiguring the entire system
- D. Updating system documentation
Answer: A,B
NEW QUESTION # 63
Which slots are reserved for Flash modules in PowerMax 2000 and 8000 single engine arrays?
- A. PowerMax 2000: Slots 0 and 6
PowerMax 8000: Slots 0, 1, 6, and 7 - B. PowerMax 2000: Slots 0 and 1
PowerMax 8000: Slots 0, 1, 9, and 10 - C. PowerMax 2000: Slots 0 and 6
PowerMax 8000: Slots 0, 1, 9, and 10 - D. PowerMax 2000: Slots 0 and 1
PowerMax 8000: Slots 0, 1, 6, and 7
Answer: A
NEW QUESTION # 64
How many vault drives are installed per node pair on a PowerMax 8500?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 65
Which PowerMax model is designed for high-density storage in a smaller footprint?
- A. PowerMax 8000
- B. PowerMax 8500
- C. PowerMax 2000
- D. PowerMax 2500
Answer: C
NEW QUESTION # 66
......
D-PM-MN-23 Exam Questions and Valid PMP Dumps PDF: https://www.pass4suresvce.com/D-PM-MN-23-pass4sure-vce-dumps.html
EMC D-PM-MN-23 Certification Real 2025 Mock Exam: https://drive.google.com/open?id=1-DXG1TnwsDwe-ozssfuX_aG0szkyTuzi