In 2026, every staff member working on the GB0-191-ENU bank shares one goal: help each test-taker move steadily toward certification, whatever their background or schedule.
H3C GB0-191-ENU Exam Overview:
| Certification Vendor: | H3C |
|---|---|
| Exam Name: | Constructing Small - and Medium - Sized Enterprise Network |
| Exam Number: | GB0-191-ENU |
| Related Certifications: | H3C Certified Network Engineer (H3CNE) |
| Real Exam Qty: | 50-60 |
| Passing Score: | 600/1000 |
| Available Languages: | English |
| Certificate Validity Period: | 3 years |
| Exam Duration: | 60 minutes |
| Exam Format: | Multiple Choice, Multiple Answer |
| Sample Questions: | ![]() |
| Exam Way: | Pearson VUE / Authorized H3C Testing Center; Computer-based exam. |
| Pre Condition: | No formal prerequisite exam required. |
| Official Syllabus URL: | https://www.h3c.com |
H3C GB0-191-ENU Exam Syllabus Topics:
| Section | Objectives |
|---|---|
| WAN Technologies | - Point-to-Point Connections
|
| Network Services | - Address and Name Services
|
| IPv6 Technologies | - IPv6 Fundamentals
|
| Network Management and Maintenance | - Troubleshooting
|
| Routing Technologies | - Dynamic Routing
|
| Network Fundamentals | - OSI Reference Model
|
| Switching Technologies | - Loop Prevention
|
| Network Security | - Access Control
|
What GB0-191-ENU Candidates Want to Know
The H3C Constructing Small - and Medium - Sized Enterprise Network questions are written and organized by senior experts and experienced specialists so that your study time concentrates on the most test-relevant knowledge. Instead of spreading your effort across endless coverage, you practice what the GB0-191-ENU exam actually weighs, which raises your learning efficiency session by session.
The real GB0-191-ENU exam gives you 60 minutes minutes for 50-60 questions. Rehearsing under the same conditions on the Pass4suresVCE engine builds the pacing you will rely on.
- IPv6 Technologies ()
- Switching Technologies ()
- WAN Technologies ()
Let the weights decide where your hours go first.
Three versions cover different working lives. The PDF downloads for learning at any time. The PC test engine runs on unlimited computers, so you can study on screens at home and at the workplace. The online engine works on any electronic equipment, with no device limit and offline use supported, so practice never depends on your location.
The package contains 434 practice questions for the GB0-191-ENU exam, all verified by senior experts and organized for focused, efficient revision.
No formal prerequisite exam required.
H3C Constructing Small - and Medium - Sized Enterprise Network Sample Questions:
The correct way to represent the following domain names is ______. (Multiple choice)
- A. KK114.com.cn
- B. www.China_Finance.com
- C. 111.222.333.cn
- D. www.95588.com
Correct Answer: C,D 🗳️
An empty-configured MSR router is connected to the same OSPF network through multiple interfaces, and OSPF is enabled on all these interfaces. After the configuration is completed, the router has successfully learned the OSPF routes in the network.
Now run the following command on an OSPF interface of the router:
[MSR-GigabitEthernet0/0]ospf cost 256
In the case of keeping other configurations unchanged, the correct understanding of the configuration is _____.
- A. This configuration may affect the forwarding path of data packets
- B. The configuration command is invalid because the command was entered incorrectly
- C. This configuration will not affect the forwarding path of data packets
- D. This configuration command is invalid because the maximum value of Cost is 255
Correct Answer: A 🗳️
On the MSR router, use the ______ command to view the router's NAT aging time.
- A. display nat time
- B. display nat time-out
- C. display nat aging-time
- D. display nat expire
Correct Answer: C 🗳️
For RIPv1 and RIPv2 running on MSR routers, which of the following statements are correct? (multiple choice)
- A. Both RIPv1 and RIPv2 can learn routes of natural classification network segments
- B. Both RIPv1 and RIPv2 can learn routes from unnaturally classified network segments, such as routes with destination network segment 10.10.200.0/22
- C. The destination network segment of the route learned on the RIPv2 router must be a subnet address with a variable length mask
- D. The destination network segment of the route learned on the RIPv1 router must be a natural classification network segment
Correct Answer: A,D 🗳️
The customer's network connection looks like:
HostA----GE0/0--MSR-1--S1/0-----WAN----S1/0--MSR-2--GE0/0----HostB
The two MSR routers are interconnected through the WAN, and the physical connection is now normal. The address of interface S1/0 of MSR-1 is 3.3.3.1/30, and the address of interface S1/0 of MSR-2 is 3.3.3.2/30. Now the following 4 static routes are configured on MSR-1:
ip route-static 192.168.1.0 255.255.255.0 3.3.3.2
ip route-static 192.168.2.0 255.255.255.0 3.3.3.2
ip route-static 192.168.3.0 255.255.255.0 3.3.3.2
ip route-static 192.168.4.0 255.255.255.0 3.3.3.2
The 192.168.0.0/22 subnet is the LAN user network segment of MSR-2.
So which of the following descriptions are wrong? (multiple choice)
- A. These four routes will be written into the routing table of MSR-1
- B. Only the fourth route will be written into the routing table of MSR-1
- C. These four routes can be replaced by one route ip route-static 192.168.1.0 255.255.252.0 3.3.3.2
- D. Only the first route will be written into the routing table of MSR-1
Correct Answer: B,C,D 🗳️
Viewing page 1 out of 87 pages.
Viewing questions 1-5 out of 434 questions.



