1Z0-1066-20 Dumps for Pass Guaranteed - Pass 1Z0-1066-20 Exam 2022
1Z0-1066-20 Exam Dumps - Try Best 1Z0-1066-20 Exam Questions from Training Expert Pass4suresVCE
NEW QUESTION 18
A customer has created a supply plan based on current requirement. Due to changes in third party forecast, the plan must be rerun with these recent updates. However, while this new information became available, existing supply like on-hand inventory and work order completions have also been updated.
Which data refresh option should be used to reflect all these changes in the plan?
- A. Do not refresh with current data
- B. Refresh with quick refresh option
- C. Refresh with forecast data
- D. Refresh with current data
- E. Refresh with selected current data
Answer: D
NEW QUESTION 19
Which four types of supplies can be reserved to a sales order in the inventory? (Choose four.)
- A. Planned Orders
- B. Purchase orders
- C. Purchase requisitions
- D. On-hand inventory
- E. Work orders
- F. Transfer orders
Answer: B,D,E,F
NEW QUESTION 20
During the FIFO pegging process, what is the correct order in which the supplies are sorted?
- A. Peg demands with reservations first and then peg demands that do not have reservations
- B. Pegging process sorts demands by due dates followed by reservation status
- C. Pegging process does not respect reservation, and demands are sorted based on demand and supply types
- D. Pegging process does not respect reservation, and demands are sorted based on due dates
- E. Peg unreserved demands first and then demands with reservations
Answer: A
NEW QUESTION 21
Your client has operations in the west coast of the US. If the customer is in the western half of the US, then they would like to ship the product from their warehouses. If it's in the eastern half of the US, then they want to drop ship it from a supplier.
How would you recommend they set the assignment up?
- A. Set up by each customer for the customers who should get product from each warehouse.
- B. Set up a region for the west coast warehouse and an item-region level assignment for the drop ship.
- C. Set up an item-organization assignment for the west coast warehouse and an item-organization level assignment for the drop ship.
- D. Set up two region level assignments, one for the west coast and the other for the east coast.
- E. Set up an item-region assignment for the west coast warehouse and a region level assignment for the drop ship.
Answer: B
NEW QUESTION 22
During implementation, the customer would like to use safety stock planning parameters. However, they would like to uncheck "Safety stock change interval to all items." What will the results be if they choose to uncheck this parameter?
- A. Safety stock will not be calculated at all for this plan.
- B. Safety stock change interval will only apply to items with Days of Cover safety stock method.
- C. Safety stock will use a smoothing method to calculate the safety stock within change interval to determine the level of safety stock needed without this parameter.
- D. This option will require a min/max quantity for this parameter even though it will not be used.
Answer: B
Explanation:
NEW QUESTION 23
Your client has made a change to item costs. What type of collection do they need to run to only pick up this change?
- A. Run net change collection for item costs.
- B. Run targeted collection for item costs.
- C. Item costs is automatically updated. No data collection is necessary.
- D. Item costs cannot be updated via a data collection processes.
- E. Must run full data collection. It is not possible to update just item costs.
Answer: B
NEW QUESTION 24
Should value in Adjusted Shipments Forecast measure always be equal to the Final Shipments Forecast measure?
- A. Yes, if the adjustment is made below the aggregation level at which it is viewed.
- B. Yes,if the adjustment is made at the same aggregation level at which itis viewed, or below.
- C. Yes,if the demand plan hasn't been run again after adjustment.
- D. Yes,if the demand plan is approved and values are locked.
- E. No, both measures will always be different.
Answer: B
NEW QUESTION 25
Which two statements are true regarding Planning Business Flows? (Choose two.)
- A. In automated plans, all release rules must be automatic.
- B. Inventory Planning cannot run in the Planning Business Flows.
- C. You can analyze and adjust data at any stage of the process.
- D. Planners can set up automatic release rules or release orders manually as part of the plan execution.
- E. Demand and Supply Planning have to be run in separate business flows.
Answer: C,D
NEW QUESTION 26
Your client wants their supply plans to have a customized group of exceptions. What two steps must you complete in order to make sure only these exceptions are included when running all of your client's supply plans? (Choose two.)
- A. Configure Exception Sets > Create exception set > Add exceptions specified by client
- B. Select 'Add to Supply Plan' button > Select which supply plans you want to have this group of exceptions
- C. Manage Plans > Select each supply plan > Edit each supply plan > Manually add each exception specified by client
- D. Configure Exceptions > Expand Supply Planning Exceptions > Highlight lines with exceptions specified by client > Click 'Add to Exception Set'
- E. Manage Plans > Select each supply plan > Edit each supply plan > Add your exception set to Plan Options for each supply plan
Answer: A,E
NEW QUESTION 27
You are defining material planners for your organization. However, when you go to Manage Material Planners, your organization does not appear in the list of values. Why?
- A. The organization must be enabled in Manage Planning Parameters.
- B. The organization is an Item Organization.
- C. You do not have data access to the organization.
- D. The organization was not enabled for collection under Manage Planning Source Systems.
- E. The organization must be enabled in Manage Planning Profile Options.
Answer: D
NEW QUESTION 28
When analyzing demand fulfillment, what are the three types of recommendations that users can review and accept for expediting? (Choose three.)
- A. Expedite buy orders
- B. Expedite transfer orders
- C. Expedite drop ship orders
- D. Expedite make orders
- E. Expedite make to stock orders
Answer: A,B,D
NEW QUESTION 29
What happens when a demand planner approves a demand plan and then adjusts shipment history and runs demand plan again?
- A. The approve action makes the Adjusted Shipments Forecast and Adjusted Bookings Forecast measures
"not editable." But any subsequent demand plan run can change Final Shipments Forecast and Final Bookings Forecast values. - B. The approve action takes the data from the two final forecast measures and copies to Approved Final Shipments Forecast and Approved Final Bookings Forecast, respectively. After a forecast is approved, the approved values remain unchanged until the forecast is approved again.
- C. The approve action takes the data from the two final forecast measures and copies to Approved Final Shipments Forecast and Approved Final Bookings Forecast, respectively. Any subsequent demand plan run can change final shipments or bookings forecast values that will automatically update the approved forecast measures.
- D. The approve action makes the Adjusted Shipments Forecast and Adjusted Bookings Forecast measures
"not editable." After a forecast is approved, the Final Shipments Forecast and Final Bookings Forecast measures remain unchanged until the forecast is approved again.
Answer: B
NEW QUESTION 30
Which disaggregation methods are used for each of these measures: adjusted shipments forecast, target service level, and shipments forecast?
- A. Adjusted shipments forecast uses equal, target service level uses same value, and shipments forecast uses measure.
- B. Adjusted shipments forecast uses measure, target service level uses same value, and shipments forecast uses self.
- C. Adjusted shipments forecast uses measure, target service level uses equal, and shipments forecast doesn't have any disaggregation method.
- D. Adjusted shipments forecast uses measure, target service level uses same value, and shipments forecast doesn't have any disaggregation method.
- E. Adjusted shipments forecast uses proportional, target service level uses same value, and shipments forecast uses measure.
Answer: B
NEW QUESTION 31
You ran a demand plan and you are reviewing the shipments forecast value measure. It is always zero for a particular item. Identify the root cause of this problem.
- A. In plan parameters, shipment forecast value measure expression is not defined.
- B. In plan parameters, Item List Price marked as primary does not have price defined for the particular item.
- C. In planning measures catalog, shipment forecast measure is not enabled at item and organization level.
- D. In planning measures catalog, shipment forecast value measure is not enabled at item and organization level.
Answer: D
NEW QUESTION 32
Which option outlines changes you can make to a simulation plan when evaluating demand and supply?
- A. Change item specification values, change item lead times, create mass changes for items
- B. Add demands, cancel demands, reschedule demands, add supply, cancel supply, reschedule supplies
- C. Change item specification values, change item lead times, create mass changes for items all at once, change item-organization specification values
- D. Add demands, cancel demands, reschedule demands, add new planned orders, reschedule supplies
- E. Change item specification values, change item lead times, change item-organization specification values
Answer: B
NEW QUESTION 33
During a client implementation, it is determined that an external forecast will need to be imported into Planning Central for use as a Demand Schedule in a Supply Plan.
What three steps must be executed to enable the successful load of the External Forecast file? (Choose three.)
- A. Collect Planning Data Process must be run from Planning.
- B. CSV file must be generated.
- C. Collect Legacy Data Process must be run from Planning.
- D. Load Interface File for Import Process must be run.
- E. Flat File must be zipped.
Answer: B,C,D
NEW QUESTION 34
During an implementation, customer is in the process of planning supply requirements. Customer also needs to generate forecast and safety stock levels. Which plan type on the plan options should the customer be running?
- A. Safety Stock and Forecast Plan
- B. Demand Plan
- C. Demand and Supply Plan
- D. Integrated Plan
- E. Supply Plan
Answer: C
NEW QUESTION 35
Your current shipments forecast for Jan 2018 is 1000 and the demand planner determines that the forecast should be 1500. Describe how the demand planner can override shipments forecast. Also, what happens to the final shipments forecast measure when the demand plan is run again and the shipments forecast value changes to 1250?
- A. Open a table with the Shipments Forecast measure and override it to 1500. The Final Shipments Forecast measure will change to 1500. During the subsequent demand plan run, the Final Shipments Forecast value will change to 1250.
- B. Open a table with the Adjusted Shipments Forecast measure and enter 1500. The Final Shipments Forecast measure will change to 1500. During the subsequent demand plan run, the Final Shipments Forecast value will change to 1250.
- C. Open a table with the Adjusted Shipments Forecast measure and enter 1500. The Final Shipments Forecast measure will change to 1500 and the value will persist during subsequent demand plan runs.
- D. Open a table with the Shipments Forecast measure and override it to 1500. The Final Shipments Forecast measure will change to 1500 and the value will persist during subsequent demand plan runs.
Answer: C
NEW QUESTION 36
......
Latest 100% Passing Guarantee - Brilliant 1Z0-1066-20 Exam Questions PDF: https://www.pass4suresvce.com/1Z0-1066-20-pass4sure-vce-dumps.html